February 13

Here’s How You Replace Damaged Or Missing Roof Shingles

precision roof repair Arlington

Roofing shingles do come off from time to time, whether due to inclement weather or just normal wear and tear. It’s a good idea to be on the lookout for those missing shingles and also damaged shingles that need to be removed and replaced. They aren’t always easy to spot, but there are certain warning signs. These warning signs can alert you to roof damage, and you can make the decision about whether to replace shingles yourself or have roofers do the work for you.

Knowing more about what the process entails can also help you make the best decision. If the damaged shingles are still in place, you need to first take them off of course. To do that, you carefully remove them above the patch, which means you go up two rows. It is important to mention that when removing shingles that are still in place, you have to be extremely careful that you don’t damage other shingles.

You must also raise those roofing nails. You can use either a nail puller or a screwdriver, whichever you prefer. When you place new shingles, you’re always going to start at the bottom. You also want to make sure you overlap the shingle that is below the one you’re placing. You’re essentially following the line and pattern.

Next, you want to be sure that you have galvanized nails on hand. You’re going to be using those to nail the new shingles in place. Let’s say that the old holes can’t be used. In that case, you’re going to create new ones, but there is something you want to do first. What you need to do is fill the old holes with roofing cement. So you’re going to need that roofing cement on hand, too.

Why couldn’t you just leave the holes since the shingles will be covering them? Well, doing so still leaves your roof vulnerable to water seeping in, and you don’t want that to happen. Now, as you place the new shingles and you get to the last one up top, you’re going to be cutting the nail strip off on top. To do that, what you use is a utility knife.

You’re then going to apply roofing cement to the back of this shingle. You need to slip the shingle underneath the shingle up top, putting it in place. You also want to press firmly. You don’t want to replace roofing shingles on a really cold day if at all possible. You should instead do the work when it’s warmer.

You also want to be sure that you stay safe. You don’t want to do anything that is going to put you in harm’s way. Considering all the tools and supplies you need, you might want to just outsource the work to the professionals,  precisionroofrepair.com/. It’s understandable if you want to do the work yourself though. Just always make safety a priority, and be sure you have all the tools and supplies necessary to get the job done.



Copyright 2019. All rights reserved.

Posted February 13, 2019 by admin in category "roof repair

Leave a Reply

Your email address will not be published. Required fields are marked *